Rasco 2K PMBC T

Two component, polymer-modified, fibrereinforced bitumen thick coating (PMBC) for waterproofing of structures below ground

Protects underground structures permanently against ground damp (capillary water, retained water).

It can be applied to foundation slabs, foundations, balconies, terraces, underground garages, cellar walls and patios, prior application to older bituminous treatments and thick coatings, as well as all known and suitable mineral substrates.

Contact request


  • Solvent-free and environmentally friendly
  • Fibre-reinforced
  • Crack-bridging and flexible
  • Easy processing
  • Good stability
  • Seamless hard-drying
  • Applicable by trowel
  • Rain resistant shortly
  • Rapid hardening
  • Frost-free at least 12 months shelf-life

Technical Data

  • Density: 1.10 kg/l
  • Material shrinkage*: 35%
  • Complete hardening / full loading capacity*: 3 days
  • Rain resistance after*: 5-6 hours
  • Setting time*: min. 2-6 hours
  • Working and drying temperature**: +5°C to +30°C

Packaging Unit

  • 30 kg bucket | 18 buckets / pallet | pallet weight approx. 585 kg
  • A component 22 kg | B component 8 kg

* These times may vary greatly, depending on humidity, temperature, coating thickness and substrate. Times are based on the standard climate of + 23 °C and
50 % relative humidity.
** Temperature: component, installation and ambient temperature.

Application / Load CaseConsumption
Dry coat 3.0 mm5.08 kg/m²
Dry coat 4.0 mm6.77 kg/m²
Scratch coating1-2 kg/m²
Gluing insulation and drainage panels1-2 kg/m²

The consumption rates shown are minimum values. These may increase according to the manner of application


Technical Service
+49 5237 608-119 oder
+49 5237 608-138

+49 5237 608-139

Contact request