Rasco Joint Filler and Sealing Compound
Hot-processable, highly elastic compound made with polymer-modified bitumen. For filling joints in landscaping and road construction
For filling joints in level areas, for example in landscaping or road construction. For waterproofing structures against ground moisture (capillary- and retained water) and non-standing seepage water.
Also applicable to metals if sufficient grip is evident. Suitable for waterproofing of cellar walls, concrete- and sand-lime brick foundations, as well as all known and suitable mineral substrates.
Contact request
Features
- Solvent-free and environmentally friendly
- Permanent high flexibility
- Resistant to chemicals
- Good elasticity even at low temperatures
- May be subjected to load immediately after cooling down
- Impervious to water
- Frost-free at least 24 months shelf-life
Technical Data
- Consumption*: Depending on joint width and depth: 3 kg/m²
- Density: 1.0 kg/l
- Flash point: > 250 °C
- Elongation at break: < 600 %
- Softening point: 105°C
- Working temperature**: +5°C to +30°C
Packaging Unit
- 10 kg Block in carton | 48 cartons / pallet | pallet weight: approx. 510 kg
- 25 kg Block in carton | 24 cartons / pallet | pallet weight approx. 640 kg
- 10 kg Block im carton | 48 cartons / pallet | pallet weight: approx. 510 kg
- 25 kg Block im carton | 24 cartons / pallet | pallet weight approx. 640 kg
* The consumption rates shown are minimum values. These may increase according to the manner of application.
** Temperature: component, installation and ambient temperature.
Downloads
Contact
Technical Service
+49 5237 608-119 oder
+49 5237 608-138
awt@bitumentechnik.de
Sales
+49 5237 608-139
vtrasco@bitumentechnik.de
Contact request