products

Rasco 2K FPD Vario

Universally applicable, two-component, flexible, polymermodified thick coating (FPD). For waterproofing of structures below ground in accordance with DIN EN 15814 und DIN 18533 – also against pressing water.

As horizontal water barrier in- and under walls and as
adhesion bridge on critical surfaces.

Protects underground structures according to DIN 18533
permanently against W1-E, W2.1-E, W3-E and W4-E.

Fully usable according to the requirements of DIN EN 15814.
Useable in and under walls according to the FPD test principles in
load case 2 (LF2). Useable as protection against radon radiation
on and under structures below ground.


Contact request

Features

  • Solvent-free and environmentally friendly
  • Crack-bridging and flexible
  • Easy processing
  • Good stability
  • Seamless hard drying
  • Applicable by trowel
  • Paintable
  • Sprayable
  • Revisable with suitable paints
  • Revisable with suitable mortars
  • Resistance to all aggressive substances
  • that occur naturally in soils
  • Rain resistant shortly
  • Rapid hardening
  • Impervious to radon
  • Resistant to frost and de-icing salts
  • Frost-free at least 9 months shelf-life

Technical Data

  • Density A+B mixed 1,2 kg/l
  • Material shrinkage 7,0 %
  • Complete hardening / 1-2 days
  • full loading capacity*
  • Rain resistance after* 2-3 hours
  • Setting time* min. 1 hour
  • Working and drying temperature** +5°C to +30°C

Packaging Unit

  • 24,8 kg Kombigebinde | Je 24,8 kg Kombigebinde 1 x A-Komponente 16 kg | 1 x B-Komponente 8,8 kg | 18 Gebinde / Palette | Palettengewicht ca. 480 kg

* These times may vary greatly, depending on humidity, temperature, coating thickness and substrate. Times are based on the standard climate of + 23 °C and 50 % relative humidity.
** Temperature: component, installation and ambient temperature

Dry layer thickness Wet layer thickness* Consumption*
2,0 mm 2,1 mm 2,5 kg/m²
3,0 mm 3,2 mm 3,8 kg/m²
4,0 mm 4,3 mm 5,2 kg/m²
Scratch coating - 1-2 kg/m²
Gluing insulation and drainage panels - 1-2 kg/m²

* The consumption rates shown are minimum values. A separate professional levelling of the substrate, for example by a scratch coating is expected.

Contact

Technical Service
+49 5237 608-119 oder
+49 5237 608-138
awt@bitumentechnik.de

Sales
+49 5237 608-139
vtrasco@bitumentechnik.de


Contact request