products

Rasco 1K PMBC IT

Single component, polymer-modified bitumen thick coating (PMBC) for waterproofing of structures below ground in accordance with EN 15814

Protects underground structures permanently against ground damp (capillary water, retained water).

It can be applied to vertical and horizontal surfaces, foundation slabs, foundations, balconies, terraces, underground garages, cellar walls and patios, prior application to older bituminous treatments and thick coatings as well as all known and suitable mineral substrates. 


Contact request

Features

  • Solvent-free and environmentally friendly
  • Crack-bridging and flexible
  • Easy processing
  • Good stability
  • Seamless hard-drying
  • Applicable by trowel
  • Ready to use
  • Resistant to frost and de-icing salts
  • Frost-free at least 12 months shelf-life

Technical Data

  • Density: 1.20 kg/l
  • Material shrinage*: 31%
  • Complete hardening / full loading capacity*: 4 days
  • Rain resistance after*: 6 hours
  • Working and drying temperature**: +5°C to +30°C

Packaging Unit

  • 30 kg bucket | 18 buckets / pallet | pallet weight approx. 580 kg
  • 10 kg bucket | 44 buckets / pallet | pallet weight approx. 480 kg

* These times may vary greatly, depending on humidity, temperature, coating thickness and substrate. Times are based on the standard climate of + 23 °C and
50 % relative humidity.
** Temperature: component, installation and ambient temperature.

Application / Load CaseConsumption
Dry coat 3.0 mm5.22 kg/m²
Dry coat 4.0 mm6.96 kg/m²
Scratch coating1-2 kg/m²

The consumption rates shown are minimum values. These may increase according to the manner of application.

Contact

Technical Service
+49 5237 608-119 oder
+49 5237 608-138
awt@bitumentechnik.de

Sales
+49 5237 608-139
vtrasco@bitumentechnik.de


Contact request