KSK BitumenCompound Tape

(thicknesses: 0.5 / 0.8 / 1.0 / 1.5 mm)
For use with Rasco Cold-applied Self-adhesive Sealing Membranes

Double-sided, strongly self-adhesive, self-amalgamating, flexible, crack-bridging, polymer-modified bitumen sealing tape without a carrier film, but with silicone paper separation tape. It is supplied as strips in a range of widths.

Intended for additional sealing in conjunction with Rasco Cold-applied self-adhesive Sealing Membrane. The strips are used to improve sealing at longitudinal and transverse joints below Rasco Cold-applied Self-adhesive Sealing Membrane (mastic to mastic principle), at wall-floor joints, internal and external corners, edges, re-entrants, joint-sealing profiles, and at complicated details such as pipe penetrations and floor drainage connections. Can also be used for securing insulation and drainage panels, and for coating expansion-joint profiles.

General features
  • all-season processable
  • flexible, tear-resistant and crack-bridging
  • immediate resistance to water and driving rain
  • pit can be backfilled immediately
  • resistant to all aggressive substances that occur naturally in soils
  • clean and easy to use
  • solvent-free and environmentally friendly
  • does not contaminate ground water
Special features
  • self-amalgamating bitumen sealing tape without a carrier foil
  • with silicone paper separation tape
  • to improve sealing at longitudinal and transverse joints
  • application temperature: -5°C bis +30°C
  • stored in the original packing, rolls upright, protected from sunlight, the shelf life is 12 months
  • width: from 50 mm to 700 mm
  • available with and without perforation

Direct contact

Application technique
+49 (0)5237-608-119 und -130 awt@bitumentechnik.de
Sales
+49 (0)5237-608-130 vt@bitumentechnik.de

Packaging units

  • Article number: n.v.variable, depending on width |

Application range

  • outside corner
  • inside corner
  • wall-lower surface
  • insulating wall panel