- You are here
- Products
- BitumenCoatings (PMB)
BitumenCoatings (PMB)
PMB-Sealing System
BitumenPaint Coatings
BitumenMembranes (KSK-System)
- KSK-AdhesionPrimer
- KSK-Special Primer
- Cold-applied Self-adhesive Sealing Membrane (thickness 1.5mm)
- Cold-applied Self-adhesive Sealing Membrane with vulcanisation strips (thickness 1.5mm)
- Corner Tape
- Cold-applied Self-adhesive Sealing Strips (thickness 1.5mm)
- Cold-applied Self-adhesive Sealing Strips (thickness 1.0 mm)
- KSK BitumenCompound Tape
(thicknesses: 0.5 / 0.8 / 1.0 / 1.5 mm) - Edging Tape - Aluminium
- Non-woven Edging Tape
- Cold-applied Self-adhesive Aluminium Sealing Membrane
- Cold-applied Self-adhesive Aluminium Sealing Membrane – Reduced Calorific Value
Roofing Products
BitumenEmulsions
BitumenHot-Sealing-Compounds
2K-BitumenCoating poly 157
for reliable waterproofing of buildings and structures
- Complies with DIN 18195, Issue: 2000-08
- With official test certificate P-DD 4222/2007 K
Protects underground structures permanently against ground moisture (capillary water, retained water), non-accumulating seepage water (DIN 18195-4), water without hydrostatic pressure (DIN 18195-5, medium and severe loadings**), and accumulating seepage water and water under hydrostatic pressure** (DIN 18195-6).
It can be applied to vertical and horizontal surfaces on any mineral-based substrate such as sand-lime brickwork, clay bricks, concrete blocks, concrete, cellular concrete, plaster and screeds.
Radon barrier, suitable for protection of buildings and structures from the ingress of radon gas.
General features
- two-component product
- suitable for between-seasons
- easy to apply by trowelling or spraying
- rapid hardening, rain resistant shortly after application
- good stability
- seamless hard-drying
- flexible, resilient, crack-bridging
- resistant to all aggressive substances that occur naturally in soils
- solvent-free
- does not contaminate ground water
Special features
- contains polystyrene
- radon barrier
- shrinkage during hard-drying: ca. 12.0%
- dry residue: ca. 88,0%
- complete drying time: ca. 1-2 days*
- rain-resistance: after ca. 4 hours*
- application time: ca. 2-4 hours*
- high productivity
- frost-free at least 12 months shelf-life
**Polymer-modified bitumen coatings are not covered in DIN 18195 Parts 5 and 6 for the load cases “Water without hydrostatic pressure – severe loading” or “Water under hydrostatic pressure “
*The time required varies with relative humidity, temperature, coating thickness and substrate.
